Technibond Limited > Applications

Products:	HSA, HTAF, HPAF and Techniflex Clear
Advantages:	UV and weather resistant Quick, clean and efficient bonding method No damage to other substrates Consistent adhesion performance Consistent adhesive thickness No drying time - move on to the next part of the fabrication No hazardous toxic fumes Supplied in accurate width rolls to match the receiving surface area Production aid film liners for accurate and simply application of the tape


	Techniflex clear - offering glass clear bonding.

	Techniflex clear - offering glass clear bonding.

	Bonding plastic extrusion to top of window section to act as a water shedder - bonded with HSA, with 'production aid' film liner for accurate placement before exposing the adhesive.

	Easy bonding of window trims with 'production aid' liners to allow accurate placement before exposing the adhesive. Film liner is simply pulled out once the trim is tucked tightly into the corner sections. For a neat tight fitting job, the use of these film liners is the only way to achieve this result.

	Easy bonding of window trims with 'production aid' liners to allow accurate placement before exposing the adhesive. Film liner is simply pulled out once the trim is tucked tightly into the corner sections. For a neat tight fitting job, the use of these film liners is the only way to achieve this result.

	Window trims already mounted with HSA with 'production aid' liners

	Glazed unit bonded into window sections with HTAF, and trim and cassette section bonded with HSA

	Glazed unit being bonded into moulded PVC door with 2mm HSA. With the use of the extensible 'production aid' film liner, the tape can be easily curved around the glazed section. The film liner also allows for accurate placement of the glazed unit before exposing the adhesive - once correctly in position, the film liner is simply removed from between the door skin and the unit to achieve the bond.

	Glazed unit being bonded into moulded PVC door with 2mm HSA. With the use of the extensible 'production aid' film liner, the tape can be easily curved around the glazed section. The film liner also allows for accurate placement of the glazed unit before exposing the adhesive - once correctly in position, the film liner is simply removed from between the door skin and the unit to achieve the bond.

	Plant on Georgian bars, already mounted with HSA for easy and accurate placement onto installed glazed units.

	Glazing brochure providing details of the industry's glazing applications and the Technibond products being used.