TAPE FOR WINDOW AND DOOR INSTALLATION Hanno Products

Your windows look great and perform to a high specification.
It makes sense to fit them with a method that complements their appearance and performance.

Hanno Products for Window and Door Installation

We recommend three Hannoband expanding foam tapes for installation:

Hannoband 3E

It is the ultimate sealing tape that performs all three sealing functions in one product.

Features

  • Weatherproof - resists driving rain to 1050 pascals
  • Windproof - contains internal membranes that cut out drafts but allow moisture diffusion
  • Insulating - the foam structure has very low thermal conductivity to keep warmth in Hannoband 3E is quick and easy to install, and is guaranteed for 10 years
FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER, CALL TECHNIBOND ON +44 1628 642800

Hannoband BG1

It is the traditional expanding foam tape that resists driving rain to over 600 pascals. Used with a foam filler and an internal membrane such as Hanno Duo Easy it too can achieve the highest performance specification.

Features

  • For heavy-duty primary and cross joints
  • All relevant test certificates are available
  • Resistant to long-term weathering
  • European Technical Approval ETA 06/0083
  • Corresponds to DIN 18542:2009, stress group 1
FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER, CALL TECHNIBOND ON +44 1628 642800

Hannoband HBD

It is a lower performance, economical expanding foam tape best used to provide heat insulation, or as a sealing tape where the joint is not directly exposed to the weather.

Features

  • Resistant to driving rain acc. to EN 1027 ≥ 300 Pa
  • Building materials class B2 acc. to DIN 4102
  • Resistant to ultraviolet radiation and to weather
  • Open to diffusion

FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER, CALL TECHNIBOND ON +44 1628 642800

Customers-Reviews

CUSTOMER REVIEWS

"Technibond has been a preferred supplier of FP Tapes limited in Ireland since 2004. Since that time we have had the benefit of doing business with a Company that has a high commitment to service. Deliveries are on time and the quality and presentation of their products is of a very high standard. Our business is twenty five years old, and in all that time we have not had another distributor that would meet the exacting standards that Technibond applies to their business. It is indeed a pleasure to do business with this Company."

 
Geraldine Healy, MD
F P Tapes

"Boyland Joinery supply high quality joinery products, including timber windows that carry a comprehensive guarantee. We require high quality components and have used Technibond since 2003. Technibond provided glazing and bonding tapes plus advice and application equipment that not only saved us money, but allowed us to bring all our glazing in-house to improve performance and quality. Additionally Technibond always delivers on time and provides an excellent Technical response to our queries."

Tim Curtis
Boyland Joinery

"Technibond Ltd offer G. F. Haynes excellent service, reliability, good quality products, technical support and are registered to BS EN ISO 9001:2008"

Shelley Robins, Director
G F Haynes

"... very happy with the service, we get a delivery at the end or very early in the month regular as clockwork and the customers love the product. Keep it up! Have a great Christmas!"

Adam Gould
Gould Autoplates & Signs Ltd.

"Just a quick thank you for despatching samples requested for 8mm and 16mm foam. Very much appreciated the length sent to enable me to build a complete prototype panel. Especially to the female who took the call for help and friendly manner and kindness. Have a good weekend! Best Regards!"

 
Jason White, Development Engineer
Navitron Systems Ltd.
swipe-hend

SWIPE TO SEE MORE TESTIMONIALS

Frequently Asked Questions

We slit most of our products to order, so we have no standard roll width. If you want 13mm or 133mm, you can have it.

As a standard, the minimum is 6mm. We can slit most products narrower than this (we have slit down to 1.6mm) but we charge the same per roll as if it were 6mm, due to the increased slitting and packaging difficulty and the increased waste. The maximum width depends on the product, but is usually at least 1 metre.

We hold large quantities of bulk rolls in stock and manufacture to order. That's the only way we can offer the number of products and product variations that we do.

UK deliveries on rolls, 3 to 5 working days. Spools, pads and die-cuts are 10 working days. If your order is urgent, please speak to our sales department and we'll try to help. Export orders are subject to longer delivery times.

Our MOQ on most rolls is £100. On rolls of Techniflex and on other formats it is £200.

All UK orders irrespective of size are subject to a standard delivery charge of £30 per order. We can arrange a.m. and courier deliveries for additional charges. Export orders will be quoted individually.

As our products are made to order, we cannot generally accept returns unless the goods are faulty. 

We are proud to guarantee the quality and performance of all our products and will quickly provide a replacement or refund if they fail to meet our standards.

Yes, we export around the world. Currently we export to Europe, the Far East, Australia and the US.