uPVC in outdoor conditions often undergoes large and repeating dimensional changes due to temperature cycling. Wood in outdoor conditions moves due to moisture content changes.  The tapes and sealing products have to cope with this movement for many years as well as withstanding rain frost and UV light.

Our products are widely used for:

  • Bonding uPVC trims and beading, and Georgian glazing bars
  • Bonding timber trims and beading, and Georgian glazing bars
  • Bonding architectural details
  • Glazing windows in uPVC and composite doors
  • Security glazing

Products

Advantages

  • UV and weather resistant
  • Quick, clean and efficient bonding method
  • No damage to other substrates
  • Consistent adhesion performance
  • Consistent adhesive thickness
  • No drying time - move on to the next part of the fabrication
  • No hazardous toxic fumes
  • Supplied in accurate width rolls to match the receiving surface area
  • Production aid film liners for accurate and simply application of the tape
Techniflex Clear<br/>Offering glass clear bonding

Techniflex Clear

Offering glass clear bonding

Bonding plastic extrusion<br/>Bonding plastic extrusion to top of window section to act as a water shedder - bonded with HSA, with 'production aid' film liner for accurate placement before exposing the adhesive.

Bonding plastic extrusion

Bonding plastic extrusion to top of window section to act as a water shedder - bonded with HSA, with 'production aid' film liner for accurate placement before exposing the adhesive.

windowpalsnew

Production Aid Liners

Easy bonding of window trims with 'production aid' liners to allow accurate placement before exposing the adhesive. Film liner is simply pulled out once the trim is tucked tightly into the corner sections. For a neat tight fitting job, the use of these film liners is the only way to achieve this result.

trimpalnew

Ready Mounted HSA

Window trims already mounted with HSA with 'production aid' liners.

Glazed unit

HTAF and HSA

Glazed unit bonded into window sections with HTAF, and trim and cassette section bonded with HSA.

Glazed unit being bonded

Glazed unit being bonded

Glazed unit being bonded into moulded PVC door with 2mm HSA. With the use of the extensible 'production aid' film liner, the tape can be easily curved around the glazed section. The film liner also allows for accurate placement of the glazed unit before exposing the adhesive - once correctly in position, the film liner is simply removed from between the door skin and the unit to achieve the bond.

georgianbar

Plant on Georgian bars

Plant on Georgian bars, already mounted with HSA for easy and accurate placement onto installed glazed units.

glazing brochure

Glazing Brochure

Glazing brochure providing details of the industry's glazing applications and the Technibond products being used.

9274 curved diecuts 450 x 240

Architectural Details

Architectural Details

OTHER PRODUCTS TO CONSIDER

double-sided

DOUBLE SIDED
THIN TAPES

acrylic-tapes

TECHNIFLEX™ ACRYLIC TAPES

insulting-img

HANNO SEALING & INSULATING

foam-img

TECHNISEAL™ FOAM SEALANTS

orafole-side

ORAFOL DOUBLE SIDED TAPES

reflace-tapes

ORALITE REFLECTIVE TAPES

book-img

FREE BUYERS GUIDE
DOWNLOAD

Fill in your details below and we will email you a free guide

FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER,
CALL TECHNIBOND ON +44 1628 642830

FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER,
CALL TECHNIBOND ON
+44 1628 642830

Customers-Reviews

CUSTOMER REVIEWS

swipe-hend

SWIPE TO SEE MORE TESTIMONIALS

FREQUENTLY ASKED QUESTIONS

What are your standard roll widths?

We slit most of our products to order, so we have no standard roll width. If you want 13mm or 133mm, you can have it.

What is the minimum and maximum roll width?

As a standard, the minimum is 6mm. We can slit most products narrower than this (we have slit down to 1.6mm) but we charge the same per roll as if it were 6mm, due to the increased slitting and packaging difficulty and the increased waste. The maximum width depends on the product, but is usually at least 1 metre.

Are the products held in stock?

We hold large quantities of bulk rolls in stock and manufacture to order. That's the only way we can offer the number of products and product variations that we do.

What is your delivery time?

UK deliveries on rolls, 3 to 5 working days. Spools, pads and die-cuts are 10 working days. If your order is urgent, please speak to our sales department and we'll try to help. Export orders are subject to longer delivery times.

How much do I have to order?

Our MOQ on most rolls is £100. On rolls of Techniflex and on other formats it is £200.

What are the delivery charges?

On UK orders over £200 delivery is free. On orders between £100 and £200 we add a small order charge of £20. We can arrange a.m. and courier deliveries for additional charges.

What is your returns policy?

As our products are made to order, we cannot generally accept returns unless the goods are faulty. 

What guarantees do you offer?

We are proud to guarantee the quality and performance of all our products and will quickly provide a replacement or refund if they fail to meet our standards.

Do you export, if so where?

Yes, we export around the world. Currently we export to Europe, the Far East, Australia and the US.