TECHNICAL TAPE FOR PLASTIC EXTRUSION
Efficient plastic extrusion needs to be continuous and uninterrupted, with little supervision. It is essential that the tape unwinds perfectly, never breaks, and that the release paper or film stays in position without any pre-release. But when the user comes to remove the release film or paper, it has to remove quickly and easily.
-
Continuous and uninterrupted
-
Unwinds perfectly
-
Never breaks
-
Stays in position without any pre-release
We supply thin and foam tape bobbins (spools) and spool applicators for continuous extrusion to minimize roll changes. The quality of our spools is second to none and they contain fewer splices than other people's spools.
We also supply rolls for smaller volumes, wider widths
and on-site application
Long length bobbins
Long length bobbins to provide continuous application on extrusion lines. Cut to any width.
Rolls & bobbins
Rolls & Bobbins cut to any width to match extrusion profiles.
Film liners
Film liners
Film liners allow for accurate placement of extrusion on to receiving surfaces.
Spool Applicators
Applicators unwind the spool properly, provide accurate placement of the tape on to the extrusion, and can be offset along the length if required. Floating heads allow for movement on the extrusion line.
Spool Applicators
Bench applicators unwind and apply roll product to non-continuous extrusions offline, and to timber profiles
FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER, CALL TECHNIBOND ON +44 1628 642800
CUSTOMER REVIEWS
SWIPE TO SEE MORE TESTIMONIALS
Frequently Asked Questions
We slit most of our products to order, so we have no standard roll width. If you want 13mm or 133mm, you can have it.
As a standard, the minimum is 6mm. We can slit most products narrower than this (we have slit down to 1.6mm) but we charge the same per roll as if it were 6mm, due to the increased slitting and packaging difficulty and the increased waste. The maximum width depends on the product, but is usually at least 1 metre.
We hold large quantities of bulk rolls in stock and manufacture to order. That's the only way we can offer the number of products and product variations that we do.
UK deliveries on rolls, 3 to 5 working days. Spools, pads and die-cuts are 10 working days. If your order is urgent, please speak to our sales department and we'll try to help. Export orders are subject to longer delivery times.
Our MOQ on most rolls is £100. On rolls of Techniflex and on other formats it is £200.
On UK orders over £200 delivery is free. On orders between £100 and £200 we add a small order charge of £20. We can arrange a.m. and courier deliveries for additional charges.
As our products are made to order, we cannot generally accept returns unless the goods are faulty.
We are proud to guarantee the quality and performance of all our products and will quickly provide a replacement or refund if they fail to meet our standards.
Yes, we export around the world. Currently we export to Europe, the Far East, Australia and the US.