TECHNICAL TAPE FOR ELECTRONICS
The electronics industry has a range of specialist needs:
High temperature tapes
Heat conductive tapes
Air and dust sealing products
We supply tapes and diecut shapes for most bonding sealing and insulating purposes.
Electronic Diecut Bonding Components
Product: Thin and foamed double sided tape or diecut bonding component
Bonding & Sealant diecuts accurately cut to exactly match receiving components.
Bonding heatsinks to pcb's.
Diecut part bonding plastic face plate to drive motor.
Diecut electronic seal with film topping to allow for a slide and compression seal.
Diecut soft foam seal
Diecut soft foam seal, with printed release papers.
Layers of printed plastic membrane bonded together with thin films.
Geraldine Healy, MD
F P Tapes
"Boyland Joinery supply high quality joinery products, including timber windows that carry a comprehensive guarantee. We require high quality components and have used Technibond since 2003. Technibond provided glazing and bonding tapes plus advice and application equipment that not only saved us money, but allowed us to bring all our glazing in-house to improve performance and quality. Additionally Technibond always delivers on time and provides an excellent Technical response to our queries."
Shelley Robins, Director
G F Haynes
Gould Autoplates & Signs Ltd.
Jason White, Development Engineer
Navitron Systems Ltd.
SWIPE TO SEE MORE TESTIMONIALS
Frequently Asked Questions
We slit most of our products to order, so we have no standard roll width. If you want 13mm or 133mm, you can have it.
As a standard, the minimum is 6mm. We can slit most products narrower than this (we have slit down to 1.6mm) but we charge the same per roll as if it were 6mm, due to the increased slitting and packaging difficulty and the increased waste. The maximum width depends on the product, but is usually at least 1 metre.
We hold large quantities of bulk rolls in stock and manufacture to order. That's the only way we can offer the number of products and product variations that we do.
UK deliveries on rolls, 3 to 5 working days. Spools, pads and die-cuts are 10 working days. If your order is urgent, please speak to our sales department and we'll try to help. Export orders are subject to longer delivery times.
Our MOQ on most rolls is £100. On rolls of Techniflex and on other formats it is £200.
On UK orders over £200 delivery is free. On orders between £100 and £200 we add a small order charge of £20. We can arrange a.m. and courier deliveries for additional charges.
As our products are made to order, we cannot generally accept returns unless the goods are faulty.
We are proud to guarantee the quality and performance of all our products and will quickly provide a replacement or refund if they fail to meet our standards.
Yes, we export around the world. Currently we export to Europe, the Far East, Australia and the US.